Table of Contents
Advertisement
Security Command Reference
management-access-filter
Syntax
management-access-filter ip-filter [entry entry-id]
management-access-filter ipv6-filter [entry entry-id]
Context
show>system>security
Description
This command displays management access control filter information.
If no specific entry number is specified, all entries are displayed.
Parameters
entry-id — displays information about the specified management access filter entry
Output
The following output is an example of management access filter information, and
the fields.
Sample Output
A:ALU-7# show system security management-access-filter ip-filter entry 1
=============================================================================
IPv4 Management Access Filters
=============================================================================
filter type:
Def. Action
Admin Status
-----------------------------------------------------------------------------
Entry
Description
Src IP
Src interface : undefined
Dest port
Protocol
Router
Action
Log
Matches
=============================================================================
A:ALU-7#
146
Table 10: Show CPM Filter Output Fields (Continued)
Label
Forwarded pkts
Values
1 to 9999
Default
All filter entries
: ip
: permit
: enabled (no shutdown)
: 1
: test description
: 10.10.10.104
: 10.10.10.103
: 6
: undefined
: permit
: disabled
: 0
Description
Indicates number of matched forwarded packets
7705 SAR OS System Management Guide
Table 11
describes
Advertisement
Table of Contents
