Table of Contents
Advertisement
Log Command Reference
For the 7705 SAR-18, log files are created by default on cf1: and accounting files are created by default
on cf2:. There are no overflows onto other devices.
When multiple location commands are entered in a single file ID context, the last command overwrites
the previous command.
When the location of a file ID that is associated with an active log ID is changed, the log events are not
immediately written to the new location. The new location does not take effect until the log is rolled
over, either because the rollover period has expired or a clear log log-id command is entered to
manually roll over the log file.
When creating files, the designated location is used as long as there is available space. If no space is
available, an attempt is made to delete unnecessary files that are past their retention date.
If sufficient space is not available, an attempt is made to remove the oldest to newest closed log or
accounting files. After each file is deleted, the system attempts to create the new file.
A medium severity trap is issued to indicate that the compact flash is either not available or that no
space is available on the specified flash.
A high-priority alarm condition is raised if the compact flash device for this file ID is not present or if
there is insufficient space available. If space does becomes available, then the alarm condition will be
cleared.
Use the no form of this command to revert to default settings.
Default
For the 7705 SAR-8, 7705 SAR-M (all variants), 7705 SAR-A (all variants), 7705 SAR-W,
7705 SAR-Wx (all variants), 7705 SAR-F, 7705 SAR-H, and 7705 SAR-Hc, log and accounting files
are created on cf3:
For the 7705 SAR-18, log files are created on cf1: and accounting files are created on cf2:
Parameters
cflash-id — specifies the location of the flash
268
•
7705 SAR-Hc
Note: The 7705 SAR-A, 7705 SAR-W, 7705 SAR-Wx, and 7705 SAR-Hc do not have
compact flash drives; they are shipped with an integrated 256 Mbyte flash memory device
that is used to store system boot software, OS software, and configuration files and logs.
These flash memory devices are identified as cf3-A: by the system.
Values
cflash-id:cf3: for all platforms; cf1: or cf2: for the 7705 SAR-18
7705 SAR OS System Management Guide
Advertisement
Table of Contents
