Alcatel-Lucent 7705 SAR System Management Manual page 124

Security Command Reference
ip-address — the IP address of the RADIUS server. Two RADIUS servers cannot have the same
key — the secret key to access the RADIUS server. This secret key must match the password on
hash — specifies that the key is entered in an encrypted form. If the hash parameter is not used,
hash2 — specifies that the key is entered in a more complex encrypted form. If the hash2
timeout
Syntax timeout seconds
no timeout
Context config>system>security>radius
Description
This command configures the number of seconds the router waits for a response from a RADIUS
server.
The no form of the command reverts to the default value.
Default
3
Parameters seconds — the number of seconds the router waits for a response from a RADIUS server,
use-default-template
Syntax [no] use-default-template
Context config>system>security>radius
Description This command specifies whether or not the user template defined by this entry is to be actively applied
to the RADIUS user.
Default
no use-default-template
124
IP address. An error message is generated if the server address is a duplicate.
Values ipv4-address
ipv6-address
the RADIUS server.
Values
up to 20 characters in length
the key is assumed to be in an unencrypted, clear text form. For security, all keys are stored
in encrypted form in the configuration file with the hash parameter specified.
parameter is not used, the less encrypted hash form is assumed.
expressed as a decimal integer
Values
1 to 90
a.b.c.d (host bits must be 0)
x:x:x:x:x:x:x:x (eight 16-bit pieces)
x:x:x:x:x:x:d.d.d.d
x: [0 to FFFF]H
d: [0 to 255]D
7705 SAR OS System Management Guide