Table of Contents
Advertisement
SNMP Command Reference
access-group
Syntax
access-group [group-name]
Context
show>system>security
Description
This command displays access group information.
Parameters
group-name — the access group name
Output
The following output is an example of access group information, and
198
Table 20: Show System Information Output Fields (Continued)
Label
Primary DNS Server
Secondary DNS Server
Tertiary DNS Server
DNS Domain
DNS Resolve Preference
BOF Static Routes
ATM location ID
ICMP Vendor Enhancement:
Description
The IP address of the primary DNS server
The IP address of the secondary DNS server
The IP address of the tertiary DNS server
The DNS domain name of the node
n/a
To: the static route destination
Next Hop: the next hop IP address used to reach the destination
Metric: displays the priority of this static route versus other
static routes
None: no static routes are configured
For ATM OAM loopbacks — the address of the network device
referenced in the loopback request
Enabled — inserts one-way timestamp in outbound SAA ICMP
ping packets
Disabled — one-way timestamping is not performed on
outbound SAA ICMP ping packets
7705 SAR OS System Management Guide
Table 21
describes the fields.
Advertisement
Table of Contents
