Table of Contents
Advertisement
Generic Security Commands
description
Syntax
description description-string
no description
Context
config>system>security>management-access-filter>ip-filter>entry
config>system>security>management-access-filter>ipv6-filter>entry
config>system>security>cpm-filter>ip-filter>entry>
config>system>security>cpm-filter>ipv6-filter>entry>
config>system>security>profile>entry
Description
This command creates a text description stored in the configuration file for a configuration context.
The no form of the command removes the string.
Default
n/a
Parameters
description-string — the description character string. Allowed values are any string up to 80
shutdown
Syntax
[no] shutdown
Context
config>system>security>management-access-filter>ip-filter
config>system>security>management-access-filter>ipv6-filter
config>system>security>cpm-filter>ip-filter
config>system>security>cpm-filter>ipv6-filter
config>system>security>radius
config>system>security>tacplus
Description
This command administratively disables the entity. The operational state of the entity is disabled as
well as the operational state of any entities contained within. When disabled, an entity does not change,
reset, or remove any configuration settings or statistics, other than the administrative state. Many
objects must be shut down before they can be deleted.
The no form of the command puts an entity into the administratively enabled state. Many entities must
be explicitly enabled using the no shutdown command.
Default
no shutdown
7705 SAR OS System Management Guide
characters long composed of printable, 7-bit ASCII characters. If the string contains special
characters (#, $, spaces, etc.), the entire string must be enclosed within double quotes.
Security
77
Advertisement
Table of Contents
