Table of Contents
Advertisement
Security Command Reference
The no form of the command removes the specified source address from the application, causing the
application to use the system IP address as the source address.
Parameters
app — specifies the application name
ip-int-name | ip-address — specifies the name of the IP interface or IPv4 address. If the string
application6
Syntax
application app ipv6-address
no application app
Context
config>system>security>source-address
Description
This command specifies the application to use the source IPv6 address specified by the source-
address command.
The no form of the command removes the specified source address from the application, causing the
application to use the system IP address as the source address.
Parameters
app — specifies the application name
ipv6-address — specifies the IPv6 address
telnet-server
Syntax
[no] telnet-server
Context
config>system>security
Description
This command enables Telnet servers running on the system.
Telnet servers are off by default. At system startup, only SSH servers are enabled.
Telnet servers in 7705 SAR networks limit a Telnet client to three retries to log in. The Telnet server
disconnects the Telnet client session after three retries.
The no form of the command disables Telnet servers running on the system.
Default
no telnet-server
80
Values
telnet, ftp, ssh, radius, tacplus, snmptrap, syslog, ping, traceroute,
dns, sntp, ntp
contains special characters (#, $, spaces, etc.), the entire string must be enclosed within
double quotes.
Values
telnet, ftp, radius, tacplus, snmptrap, syslog, ping, traceroute, dns
7705 SAR OS System Management Guide
Advertisement
Table of Contents
