Table of Contents
Advertisement
SNMP Command Reference
196
Table 20: Show System Information Output Fields (Continued)
Label
SNMP Port
SNMP Engine ID
SNMP Max Message Size
SNMP Admin State
SNMP Oper State
SNMP Index Boot Status
SNMP Sync State
Tel/Tel6/SSH/FTP Admin
Tel/Tel6/SSH/FTP Oper
BOF Source
Image Source
Config Source
Last Booted Config File
Description
The port that SNMP sends responses to management requests
The ID for either the local or remote SNMP engine to uniquely
identify the SNMPv3 node
The maximum size SNMP packet generated by this node
Enabled: SNMP is administratively enabled
Disabled: SNMP is administratively disabled
Enabled: SNMP is operationally enabled
Disabled: SNMP is operationally disabled
Persistent: Persistent indexes was enabled at the last system
reboot
Disabled: Persistent indexes was disabled at the last system
reboot
The state when the synchronization of configuration files
between the primary and secondary CSMs finish
The administrative state of the Telnet, Telnet IPv6, SSH, and
FTP sessions
The operational state of the Telnet, Telnet IPv6, SSH, and FTP
sessions
The boot location of the BOF
primary: specifies whether the image was loaded from the
primary location specified in the BOF
secondary: specifies whether the image was loaded from the
secondary location specified in the BOF
tertiary: specifies whether the image was loaded from the
tertiary location specified in the BOF
primary: specifies whether the configuration was loaded from
the primary location specified in the BOF
secondary: specifies whether the configuration was loaded from
the secondary location specified in the BOF
tertiary: specifies whether the configuration was loaded from the
tertiary location specified in the BOF
The URL and filename of the configuration file used for the
most recent boot
7705 SAR OS System Management Guide
Advertisement
Table of Contents
