Alcatel-Lucent 7705 SAR System Management Manual page 121

RADIUS Client Commands
radius
Syntax [no] radius
Context config>system>security
Description
This command creates the context to configure RADIUS authentication on the 7705 SAR.
Implement redundancy by configuring multiple server addresses for each 7705 SAR.
The no form of the command removes the RADIUS configuration.
access-algorithm
Syntax access-algorithm {direct | round-robin}
[no] access-algorithm
Context config>system>security>radius
Description
This command configures the algorithm used to access the set of RADIUS servers. Up to five servers
can be configured.
In direct mode, the first server, as defined by the
always used first when authenticating a request. In round-robin mode, the server used to authenticate
a request is the next server in the list, following the last authentication request. For example, if server
1 is used to authenticate the first request, server 2 is used to authenticate the second request, and so on.
Default
direct
Parameters
direct — first server is always used to authenticate a request
round-robin — server used to authenticate a request is the next server in the list, following the
accounting
Syntax [no] accounting
Context config>system>security>radius
Description
This command enables RADIUS accounting. The no form of this command disables RADIUS
accounting.
Default no accounting
7705 SAR OS System Management Guide
last authentication request
server command, is the primary server. This server is
Security
121