Alcatel-Lucent 7705 SAR System Management Manual page 295

event-control
Syntax event-control [application-id] [event-name | event-number]
Context show>log
Description
This command displays event control settings for events, including whether the event is suppressed or
generated and the severity level for the event.
If no options are specified, all events, alarms and traps are listed.
Parameters
application-id — displays event control for the specified application only
event-name — displays event control for the named application event only
event-number — displays event control for the specified application event number only
Output
The following output is an example of event control information, and
Because the output is very large, only a sample of the events are shown here.
Sample Output
A:gal171# show log event-control
=======================================================================
Log Events
=======================================================================
Application
-----------------------------------------------------------------------
ATM:
L
...
CHASSIS:
7705 SAR OS System Management Guide
Values
aps, atm, bgp, chassis, debug, dhcp, dot1ag, efm_oam, eth-cfm,
filter, ip, isis, ldp, logger, mpls, ntp, oam, ospf, port, ppp, ptp, rip,
qos, route_policy, rsvp, security, snmp, stp, svcmgr, system, user,
vrtr
Default
all applications
Default
all events for the application
Default
all events for the application
ID# Event Name
2004 tAtmTcSubLayerDown
2005 tAtmTcSubLayerClear
2006 atmVclStatusChange
2001 cardFailure
2002 cardInserted
2003 cardRemoved
2004 cardWrong
2005 EnvTemperatureTooHigh
2007 powerSupplyOverTemp
2008 powerSupplyAcFailure
2009 powerSupplyDcFailure
2010 powerSupplyInserted
2011 powerSupplyRemoved
2012 redPrimaryCPMFail
Event and Accounting Logs
Table 42
P g/s Logged
MI gen 0
MI gen 0
WA gen 0
MA gen 4
MI gen 3
MI gen 8
MI gen 0
MA gen 0
CR gen 0
CR gen 0
CR gen 0
MA gen 0
MA gen 0
CR gen 0
describes the fields.
Dropped
0
0
0
0
0
0
0
0
0
0
0
0
0
0
295