Table of Contents
Advertisement
retry
Syntax
retry count
no retry
Context
config>system>security>radius
Description
This command configures the number of times the router attempts to contact the RADIUS server for
authentication if there are problems communicating with the server.
The no form of the command reverts to the default value.
Default
3
Parameters
count — the retry count
server
Syntax
server server-index address ip-address secret key [hash | hash2]
no server server-index
Context
config>system>security>radius
Description
This command adds a RADIUS server and configures the RADIUS server IP address, index, and key
values.
Up to five RADIUS servers can be configured at any one time. RADIUS servers are accessed in order
from lowest to highest index for authentication requests until a response from a server is received. A
higher-indexed server is only queried if no response is received from a lower-indexed server (which
implies that the server is not available). If a response from a server is received, no other RADIUS
servers are queried. It is assumed that there are multiple identical servers configured as backups and
that the servers do not have redundant data.
The no form of the command removes the server from the configuration.
Default
no RADIUS servers are configured
Parameters
index — the index for the RADIUS server. The index determines the sequence in which the
7705 SAR OS System Management Guide
Values
1 to 10
servers are queried for authentication requests. Servers are queried in order from lowest to
highest index.
Values
1 to 5
Security
123
Advertisement
Table of Contents
