Table of Contents
Advertisement
Log Command Reference
to session
Syntax
to session
Context
config>log>log-id
Description
This command is one of the commands used to specify the log ID destination. This parameter is
mandatory when configuring a log destination.
This command instructs the events selected for the log ID to be directed to the current console or telnet
session. This command is only valid for the duration of the session. When the session is terminated,
the log ID is removed. A log ID with a session destination is not saved in the configuration file.
The source of the data stream must be specified in the from command prior to configuring the
destination with the to command.
The to command cannot be modified or re-entered. If the log destination needs to be changed or if the
maximum size of an SNMP log or memory log needs to be modified, the log ID must be removed then
recreated.
Default
No destination is specified.
to snmp
Syntax
to snmp [size]
Context
config>log>log-id
Description
This command is one of the commands used to specify the log ID destination. This parameter is
mandatory when configuring a log destination.
This command instructs the alarms and traps to be directed to the snmp-trap-group associated with
the log-id.
A local circular memory log is always maintained for SNMP notifications sent to the specified
snmp-trap-group for the log-id.
The source of the data stream must be specified in the from command prior to configuring the
destination with the to command.
The to command cannot be modified or re-entered. If the log destination needs to be changed or if the
maximum size of an SNMP log or memory log needs to be modified, the log ID must be removed then
recreated.
Default
No destination is specified.
Parameters
size — defines the number of events stored in this memory log
286
Values
50 to 1024
Default
100
7705 SAR OS System Management Guide
Advertisement
Table of Contents
