Alcatel-Lucent 7705 SAR System Management Manual page 113

User Management Commands
user
Syntax [no] user user-name
Context config>system>security
Description
This command creates a local user and a context to edit the user configuration.
If a new user-name is entered, the user is created. When an existing user-name is specified, the user
parameters can be edited.
When a new user is created and the info command is entered, the system displays a password with
hash2 encryption in the output screen. However, when using that user name, there will be no password
required. The user can log in to the system by entering their user name and then pressing ↵ at the
password prompt.
Unless an administrator explicitly changes the password, it will be null. The hashed value displayed
uses the user name and null password field, so when the user name is changed, the displayed hashed
value will change.
The no form of the command deletes the user and all configuration data. Users cannot delete
themselves.
Default
n/a
Parameters
user-name — the name of the user, up to 16 characters
user-template
Syntax user-template {tacplus_default | radius_default}
Context config>system>security
Description
This command configures default security user template parameters.
Parameters tacplus_default — specifies that the TACACS+ default template is used for the configuration
radius_default — specifies that the RADIUS default template is used for the configuration
7705 SAR OS System Management Guide
Security
113