Parameters
log-prefix-string — an alphanumeric string of up to 32 characters. Special characters (#, $,
port
Syntax
port value
no port
Context
config>log>syslog
Description
This command configures the UDP port that will be used to send syslog messages to the syslog target
host.
The port configuration is needed if the syslog target host uses a port other than the standard UDP syslog
port 514.
Only one port can be configured. If multiple port commands are entered, the last entered port
overwrites the previously entered ports.
The no form of the command reverts to default value.
Default
no port
Parameters
value — the configured UDP port number used when sending syslog messages
7705 SAR OS System Management Guide
spaces, etc.) cannot be used in the string.
Values
1 to 65535
Event and Accounting Logs
281