Table of Contents
Advertisement
Log Command Reference
log-id
Syntax
log-id [log-id] [severity severity-level] [application application] [sequence from-seq
[to-seq]] [count count] [router router-instance [expression]] [subject subject [regexp]]
[ascending | descending]
Context
show>log
Description
This command displays an event log summary with settings and statistics or the contents of a specific
log file, SNMP log, or memory log.
If the command is specified with no command line options, a summary of the defined system logs is
displayed. The summary includes log settings and statistics.
If the log ID of a memory, SNMP, or file event log is specified, the command displays the contents of
the log. Additional command line options control what and how the contents are displayed.
Contents of logs with console, session or syslog destinations cannot be displayed. The actual events
can only be viewed on the receiving syslog or console device.
Parameters
log-id — displays the contents of the specified log file or memory log ID. The log ID must have a
severity-level — displays only events with the specified and higher severity
application — displays only events generated by the specified application
sequence from-seq [to-seq] — displays the log entry numbers from a particular entry sequence
304
destination of an SNMP or log file or a memory log for this parameter to be used.
Values
1 to 99
Default
displays the event log summary
Values
cleared, indeterminate, critical, major, minor, and warning
Default
all severity levels
Values
aps, atm, bgp, chassis, debug, dhcp, dot1ag, efm_oam, eth-cfm,
filter, ip, isis, ldp, logger, mpls, ntp, oam, ospf, port, ppp, ptp, qos,
rip, route_policy, rsvp, security, snmp, stp, svcmgr, system, user,
vrtr
Default
all applications
number (from-seq) to another sequence number (to-seq). The to-seq value must be larger than
the from-seq value.
If the to-seq number is not provided, the log contents to the end of the log are displayed unless
the count parameter is present, in which case the number of entries displayed is limited by the
count.
Values
1 to 4294967295
Default
all sequence numbers
7705 SAR OS System Management Guide
Advertisement
Table of Contents
