Table of Contents
Advertisement
Log Command Reference
event-id — the event ID, expressed as a decimal integer
router
Syntax
router {eq | neq} router-instance [regexp]
no router
Context
config>log>filter>entry>match
Description
This command specifies the log event matches for the router.
Parameters
eq — determines if the matching criteria should be equal to the specified value
neq — determines if the matching criteria should not be equal to the specified value
router-instance — specifies a router name up to 32 characters to be used in the match criteria
regexp — specifies the type of string comparison to use to determine if the log event matches the
severity
Syntax
severity {eq | neq | lt | lte | gt | gte} severity-level
no severity
Context
config>log>filter>entry>match
Description
This command adds an event severity level as a match criterion.
Only one severity command can be entered per event filter entry. When multiple severity commands
are entered, the last command overwrites the previous command.
The no form of the command removes the severity match criterion.
Default
no severity
274
Table 34: Valid Match Operators for Event Numbers (Continued)
Operator
gt
gte
Values
1 to 4294967295
value of router command parameters. When the regexp keyword is specified, the string in
the router command is a regular expression string that will be matched against the router
string in the log event being filtered.
When the regexp keyword is not specified, the router command string is matched exactly by
the event filter.
Notes
Greater than
Greater than or equal to
7705 SAR OS System Management Guide
Advertisement
Table of Contents
