Table of Contents
Advertisement
SNMP Command Reference
security-level no-auth-no-privacy — specifies that no authentication and no privacy
security-level auth-no-privacy — specifies that authentication is required but privacy
security-level privacy — specifies that both authentication and privacy (encryption) is required.
context-name — specifies a set of SNMP objects that are associated with the context-name
prefix-match — specifies the context-name prefix-match keywords, exact or prefix
read view-name-1 — specifies the keyword and variable of the view to read the MIB objects.
write view-name-2 — specifies the keyword and variable of the view to configure the contents of
notify view-name-3 — specifies the keyword and variable of the view to send a trap about MIB
attempts
Syntax
attempts [count] [time minutes1] [lockout minutes2]
no attempts
Context
config>system>security>snmp
Description
This command configures a threshold value for the number of unsuccessful SNMP connection
attempts allowed in a specified time frame. The command parameters are used to counter denial of
service (DOS) attacks through SNMP.
If the threshold is exceeded, the host is locked out for the lockout time period.
If multiple attempts commands are entered, each command overwrites the previously entered
command.
The no form of the command resets the parameters to the default values.
188
(encryption) is required. When configuring the user's authentication, select the none option.
(encryption) is not required. When this option is configured, both the group and the user must
be configured for authentication.
When this option is configured, both the group and the user must be configured for
authentication. The user must also be configured for privacy.
The context name is treated as either a full context name string or a context name prefix
depending on the keyword specified (exact or prefix).
Default
exact
This command must be configured for each view to which the group has read access.
Values
up to 32 characters
the agent. This command must be configured for each view to which the group has write
access.
Values
up to 32 characters
objects. This command must be configured for each view to which the group has notify
access.
Values
up to 32 characters
7705 SAR OS System Management Guide
Advertisement
Table of Contents
