Parameter List; Actual Values - BONFIGLIOLI Vectron ACTIVE CUBE Manual

14 Parameter list

The parameter list is structured according to the menu branches of the operating unit.
For better clarity, the parameters have been marked with pictograms:
14.1
No.
228 Internal reference frequency
249 Active data set
250 Digital inputs
270 Warnings
281 DP-Master OUT
282 Reference bus frequency
283 Reference ramp frequency
284 DP-Master IN
365 Status Control
366 Status Fieldbus Module
Note:
52
52
The parameter is available in the four data sets
The parameter value is set by the SET-UP routine
This parameter cannot be written when the frequency inverter is in operation

Actual values

Actual values of the frequency inverter
Description
DP Master OUT
The parameters
displayed via the VPlus program. Operation of the VPlus program, when
using the Profibus-DPV1 communication module CM-PDP, is only possible
via the optional KP232 serial adapter on the slot of the KP500 control unit.
Warnings
The parameter
channel of objects PPO1 and PPO2. It cannot be accessed via the VPlus
program or the KP500 control unit.
CM-PDPV1
Unit
Hz
-
-
-
-
Hz
Hz
-
-
-
281 and
270 is only accessible via the communication
CM-PDPV1
Display range Chapter
-1000.00 to 1000.00 13.4.5
1 to 4 13.4.1
0 to 255 13.4.4
0 to 0xFFFF
String
-1000.00 to 1000.00 13.4.5
-1000.00 to 1000.00 13.4.5
String
0 to 7
1 to 15
DP Master IN
284 can only be
15.1
13.5
13.5
8
8
08/08
08/08