Transport And Storage; Handling And Installation; Electrical Connection - BONFIGLIOLI Vectron ACTIVE CUBE Manual

1.3
Transport and storage are to be carried out in an adequate way in the original packag-
ing. Storage shall be in dry rooms protected against dust and moisture with slight
temperature fluctuations. Please observe the climatic conditions according to EN
50178 and the marking on the packaging. The duration of storage without connection
to the admissible reference voltage may not exceed one year.
1.4
Warning! Damaged or destroyed components may not be put into operation be-
The frequency inverters are to be used according to the documentation, the directives
and the standards. Handle carefully and avoid mechanical overload. Do not bend the
components or change the isolation distances. Do not touch electronic components or
contacts. The devices contain electrostatic sensitive components which can easily be
damaged by improper handling. Any use of damaged or destroyed components shall
be considered as a non-compliance with the applicable standards. Do not remove any
warning signs from the device.
1.5
Warning! Before any assembly or connection work, de-energize the frequency in-
While working on the frequency inverters, obey the applicable standards BGV A2
(VBG 4), VDE 0100 and other national directives. Comply with the information in the
documentation on electrical installation and the relevant directives. Responsibility for
compliance with and examination of the limit values of the EMC product standard EN
61800-3 for variable-speed electrical drive mechanisms is with the manufacturer of
the industrial plant or machine.
The documentation contains information on installation correct for EMC. The cables
connected to the frequency inverters may not be subjected to an isolation test with a
high test voltage without previous circuit measures.
6
6

Transport and storage

Handling and installation

cause they may be a health hazard.

Electrical connection

verter. Make sure that the frequency inverter is de-energized.
Do not touch the sockets, because the capacitors may still be charged.
Comply with the information given in the operating instructions and on
the frequency inverter label.
CM-PDPV1
CM-PDPV1
08/08
08/08