Message Scratchpad - GE MOTOR MANAGEMENT RELAY 469 Instruction Manual

4.2 S1 469 SETUP
S MESSAGE SCRATCHPAD
S [ENTER] for more
Up to 5 message screens can be programmed under the Message Scratchpad area. These messages may be
notes that pertain to the installation or the motor or any other information deemed pertinent by the user. In addi-
4
tion, these messages may be selected for scanning during default message display. This might be useful for
reminding operators to perform certain tasks. The messages may be entered from the communications ports
or through the keypad. The following procedure demonstrates the use of the message scratchpad:
1. Select the user message to be changed.
2. Press the decimal [ . ] key to enter text mode. An underline cursor will appear under the first character.
VALUE
3. Use the
4. Press the decimal [.] key to advance to the next character. To skip over a character press the decimal key.
If an incorrect character is accidentally stored, press the decimal key enough times to scroll the cursor
around to the character.
5. When the desired message is displayed press
manently stored. Press
4-8
ð
TEXT 1
ENTER
ESCAPE
TEXT 2
ESCAPE
MESSAGE
TEXT 3
ESCAPE
MESSAGE
TEXT 4
ESCAPE
MESSAGE
MULTILIN 469 MOTOR
ESCAPE
MANAGEMENT RELAY
MESSAGE
VALUE
/ key to display the desired character. A space is selected like a character.
ESCAPE
to cancel the altered message.
469 Motor Management Relay
4 SETPOINT PROGRAMMING

4.2.6 MESSAGE SCRATCHPAD

Range: 40 character alphanumeric
Range: 40 character alphanumeric
Range: 40 character alphanumeric
Range: 40 character alphanumeric
Range: 40 character alphanumeric
ESCAPE
ENTER to store or to quit. The message is now per-
GE Power Management