Order Information; Other Accessories - GE MOTOR MANAGEMENT RELAY 469 Instruction Manual

1.1 OVERVIEW
1
All 469 features are standard; there are no options. The phase CT secondaries, control power, and analog out-
put range must be specified at the time of order. The 469 differential CT inputs are field programmable for CTs
with 1 A or 5 A secondaries. There are two ground CT inputs, one for the GE Power Management 50:0.025
core balance CT and one for a ground CT with a 1 A or 5 A secondary, also field programmable. The VT inputs
will accommodate VTs in either a delta or wye configuration. The output relays are always non-failsafe with the
exception of the service relay. The 469PC software is provided with each unit. A metal demo case may be
ordered for demonstration or testing purposes.
469
469
Additional accessories are listed in the following section.
• 469PC Software:
• DEMO:
• SR 19-1 PANEL:
• SR 19-2 PANEL:
• SCI MODULE:
• Phase CT:
• HGF3, HGF5, HGF8:
• 469 1" Collar:
• 469 3" Collar:
• Optional Mounting Kit: Additional mounting support 1819-0030
1-4
* * *
Basic unit
P1 1A phase CT secondaries
P5 5A phase CT secondaries
LO DC: 25-60 V; AC: 20-48 V @ 48-62 Hz
HI DC: 90-300 V; AC: 70-265 V @ 48-62 Hz
A1 0-1 mA analog outputs
A20 4-20 mA analog outputs
Figure 1–3: 469 ORDER CODES
Provided free with each relay
Metal Carry Case in which 469 unit may be mounted
Single cutout 19" panel
Dual cutout 19" panel
RS232 to RS485 converter box designed for harsh industrial environments
50, 75, 100, 150, 200, 250, 300, 350, 400, 500, 600, 750, 1000
For sensitive ground detection on high resistance grounded systems.
For shallow switchgear, reduces the depth of the relay by 1 #3/8"
For shallow switchgear, reduces the depth of the relay by 3"
469 Motor Management Relay
1 INTRODUCTION

1.1.2 ORDER INFORMATION

1.1.3 OTHER ACCESSORIES

GE Power Management