Temperature - GE MOTOR MANAGEMENT RELAY 469 Instruction Manual

5.3 A2 METERING DATA
S TEMPERATURE
S [ENTER] for more
5
The current level of the 12 RTDs is displayed here. If the RTD is not connected, the value will be "No RTD".
If no RTDs are programmed in S8 RTD TEMPERATURE, the following flash message will appear when an attempt
is made to enter this group of messages.
THIS FEATURE NOT
PROGRAMMED
5-10
ð
HOTTEST STATOR RTD
ENTER
RTD#1: 40°C
ESCAPE
RTD #1
ESCAPE
TEMPERATURE: 40°C
MESSAGE
RTD #2
ESCAPE
TEMPERATURE: 40°C
MESSAGE
RTD #3
ESCAPE
TEMPERATURE: 40°C
MESSAGE
RTD #4
ESCAPE
TEMPERATURE: 40°C
MESSAGE
RTD #5
ESCAPE
TEMPERATURE: 40°C
MESSAGE
RTD #6
ESCAPE
TEMPERATURE: 40°C
MESSAGE
RTD #7
ESCAPE
TEMPERATURE: 40°C
MESSAGE
RTD #8
ESCAPE
TEMPERATURE: 40°C
MESSAGE
RTD #9
ESCAPE
TEMPERATURE: 40°C
MESSAGE
RTD #10
ESCAPE
TEMPERATURE: 40°C
MESSAGE
RTD #11
ESCAPE
TEMPERATURE: 40°C
MESSAGE
RTD #12
ESCAPE
TEMPERATURE: 40°C
MESSAGE
469 Motor Management Relay
Range: –50 to 250°C, No RTD (open), ---- (shorted)
Seen only if at least 1 RTD programmed as Stator
Range: –50 to 250°C, No RTD (open), ---- (shorted)
Not seen if RTD set as None; reflects RTD Name as programmed
Range: –50 to 250°C, No RTD (open), ---- (shorted)
Not seen if RTD set as None; reflects RTD Name as programmed
Range: –50 to 250°C, No RTD (open), ---- (shorted)
Not seen if RTD set as None; reflects RTD Name as programmed
Range: –50 to 250°C, No RTD (open), ---- (shorted)
Not seen if RTD set as None; reflects RTD Name as programmed
Range: –50 to 250°C, No RTD (open), ---- (shorted)
Not seen if RTD set as None; reflects RTD Name as programmed
Range: –50 to 250°C, No RTD (open), ---- (shorted)
Not seen if RTD set as None; reflects RTD Name as programmed
Range: –50 to 250°C, No RTD (open), ---- (shorted)
Not seen if RTD set as None; reflects RTD Name as programmed
Range: –50 to 250°C, No RTD (open), ---- (shorted)
Not seen if RTD set as None; reflects RTD Name as programmed
Range: –50 to 250°C, No RTD (open), ---- (shorted)
Not seen if RTD set as None; reflects RTD Name as programmed
Range: –50 to 250°C, No RTD (open), ---- (shorted)
Not seen if RTD set as None; reflects RTD Name as programmed
Range: –50 to 250°C, No RTD (open), ---- (shorted)
Not seen if RTD set as None; reflects RTD Name as programmed
Range: –50 to 250°C, No RTD (open), ---- (shorted)
Not seen if RTD set as None; reflects RTD Name as programmed
5 ACTUAL VALUES

5.3.2 TEMPERATURE

GE Power Management