Information Group; Table 9. Relay Status Information - GE MOV 2000 Instructions Manual

8. KEYPAD AND DISPLAY

8.3. INFORMATION GROUP

This group provides information about the status of the MOV. Press the INF key in the main menu to access this
group. The information group consists of the following sub-groups:
• Status
Press the INF key to access this subgroup in the same way as in the operation in the settings group. This takes us
to level 1 in the menus. When this sub-group has been selected (in this case it is the only option) we press the
ENT key to see the contents (down to level 2). In this level we can move through the contents by using the
UP/DOWN arrows. Press the CLR key repeatedly to leave the information group and return to the reset screen.
Status.
The MOV allows you to view the status of certain internal values of the relay. From the status menu we press the
ENT key. By pressing the UP arrow key we can move through the status menu and obtain the following
information :
64
GENERAL ELECTRIC
STATUS

TABLE 9. RELAY STATUS INFORMATION

DISPLAY
MODEL
MOV2100M101H00A
DATABASE
VERSION PROT
VERSION COM
Va-LINE
Vb-LINE
Vc-LINE
V-SIDE1
V-SIDE2
DIF. ANGLE 521
DIF. FREQUENCY 521
DIF. ANGLE 520
DIF. FREQUENCY 520
RELAY STATUS
ACTIVE TABLE
LINE 89
521 LINE BUSBAR
SYNCHRO 521 INST
SYNCHRO 521 79
SYNCHRO 521 CLOSE
520 LINE BUSBAR
SYNCHRO 520 INST
SYNCHRO 520 79
MIV Digital Multifunctional Protective Relay
MOV
INF
POSSIBLE VALUES
Depends on model
Depends on model
Depends on model
Depends on model
Measured values
Measured values
Measured values
Measured values
Measured values
Measured values
Measured values
Measured values
Measured values
In/Out of Service
1, 2 or 3
Open/Closed
Dead / Live
Yes/No
Yes/No
Yes/No
Dead / Live
YES/NO
YES/NO
GEK-106271