Adjustment Of The Machines Effected By Authorised Service Technician During The First Setting In Operation; Commissioning; Chemical Product Settings - Meiko UPster K Operating Instructions Manual

Operating instructions for rack type dishwashing machine , model Upster K
Risk of injury, damage to property!
As a result of unintended work on the system.
All persons involved in operation, maintenance or repair work must have read and
understood the General safety instructions section.
Risk of fatal electrical shock or fatal injuries caused by rotating parts!
All cladding must be intact before commissioning!
9726766
8 Adjustment of the machines effected by author-
ised service technician during the first setting in
operation
8.1

Commissioning

Commissioning and training will be handled and provided by MEIKO authorised
service technician. The operator must not use the installation before completing
training.
Perform any required initial checks on supplied parts, such as water treatment
units or other units. More detailed information, if required, can be found in the rele-
vant operating instructions.
To avoid damage or dangerous injuries during the setting in operation of the instal-
lation, please observe the following points:
Check any escaped fluids have been removed.
Activate all the safety systems before commissioning.
Check that all screw connections are tight.
8.2

Chemical product settings

The correct settings for the quantity of detergent and rinse aid depend on the prod-
uct used. The relevant chemical product supplier can install the correct setting.
Design and construction subject to change without prior notice!
Page 23 of 42
WARNING
DANGER