Table of Contents
Advertisement
Operating instructions for rack type dishwashing machine , model Upster K
9726766
7.3
Installation and assembly
MEIKO created an installation drawing featuring machine dimensions as well as
connection and consumption values.
The system must be installed as per the information in the installation drawing. It
m u s t be installed by a licensed and authorised technician.
Assembly is completed by reference to the assembly diagram and, in general, by
following the instructions of a trained MEIKO engineer. The machine must be in-
stalled and connected by an approved professional.
For Australia only:
The equipment must be installed in accordance to AS/NZ 3500.1.
We do not accept any liability for damage caused by unprofessionally implemented
connection work.
System installation steps:
Position the unpacked machine according to the dimensions specified on the in-
stallation drawing.
Set up the machine so that it is correctly levelled and aligned.
Refer to the separate installation instructions for additional information on installa-
tion.
7.4
Floor load from the dishwashing machine
The floor load per leg (with a loaded area
7.5
Instructions for disposal of packing material
•
The four-sided wooden frame consists of untreated, raw pine / spruce. Special
country-specific import regulations may also stipulate the use of wood which
has been treated against pests.
•
The plastic sheeting (PE sheeting) may be recycled.
•
The cardboard packaging material used to protect the edges can also be re-
cycled.
•
The steel strap from the packaging can be recycled as steel scrap.
•
The plastic tensioning strap (PP) can be recycled.
7.6
Requirements to the installation area
•
Ensure that the storage and installation area is permanently frost free.
If the system is installed in an area where the surrounding temperatures are
below 0°C, the water freezing inside may damage the internal water compo-
nents (pump, solenoid valve, etc.).
•
Anti-slip floor coverings must be provided in the system's work area.
Design and construction subject to change without prior notice!
Page 18 of 42
Ø
=30 mm per leg) is approx. 220 kg
Hide quick links:
Advertisement
Table of Contents
