Basic Safety Measures - Meiko UPster K Operating Instructions Manual

Operating instructions for rack type dishwashing machine , model Upster K
9726766
•
the dishwashing machine is only operated in a perfect, operationally efficient
condition and, in particular, that the safety systems and switch elements are
checked on a regular basis for their operational efficiency.
•
the required personal protective equipment is made available to and used by
maintenance and repair personnel.
•
a functional test on all safety systems of the installation is carried out during
every regular maintenance.
•
all the safety, warning and operating instructions provided are not removed
and are legible.
•
any necessary initial tests to parts supplied by sub-suppliers, such as heat
pumps or other equipment, must be carried out. More detailed information, if
required, can be found in the relevant operating instructions.
•
there are no further modifications after assembly, commissioning and hando-
ver of the dishwashing machine to customers/operators (e.g. electrical modifi-
cations or location changes). modifications to the dishwashing machine, and
in particular technical modifications carried out without the manufacturer's writ-
ten authorization, or any modifications carried out by unauthorized persons,
will lead to the complete loss of any guarantee claims and will invalidate any
liability for the product.
•
equipment for optimising energy consumption must not be used to reduce es-
sential operating temperatures, as set out in DIN 10511, 10512 and 10522. If
you, the client, install equipment for optimising energy consumption, any pos-
sible reduction in the quality of the wash and hygiene is your responsibility.
5.3

Basic safety measures

Risk of injury due to electric shock, damage to property.
Parts carrying electric current as well as moving or rotating parts can
cause·danger to the user's life and limb and material damage.
Danger can arise from the improper use of the machine or if it is used for pur-
poses for which it was not intended.
The machine may only be operated by adequately qualified staff who have been
trained by the operating company and who have been trained about the hazard
and safety instructions.
When electrical equipment is in operation, it is inevitable that certain parts carry
a dangerous current.
The entire dishwashing machine must be de-energised before opening dish-
washing machine cover panels or electrical equipment.
SWITCH the locally available MAIN SWITCH TO "OFF" and install suitable lock-
ing devices to prevent the switch from being switched back on.
Work and troubleshooting on electrical parts of the dishwashing machine must
be performed by specialists only. Observe accident prevention regulations.
The operator must not restart the dishwashing machine until all cover panels
have been put back in place.
•
Qualified staff, as defined by the Operating Instructions, are persons:
– over 14 years of age
– who have read and observe the safety instructions as well as the operating
instruction,
Design and construction subject to change without prior notice!
Page 13 of 42
DANGER