General Safety Rules; Operator's Duty Of Care; Measures To Ensure Safe System Operation - Meiko UPster K Operating Instructions Manual

Operating instructions for rack type dishwashing machine , model Upster K
9726766
5

General safety rules

The following safety instructions are for your protection as well as the protection of
others and the dishwasher. Compliance with the instructions is therefore absolutely
necessary.
5.1

Operator's duty of care

This machine has been constructed and designed based on a risk assess-
ment and careful selection of the applicable harmonised standards, as well
as additional technical specifications.
It is therefore state of the art and guaranteed to provide maximum safety. Safety
can only be guaranteed during operation if all necessary measures are taken.
The operator of the installation has an obligation of care to ensure that these
measures are planned for, and also to check that they are correctly implemented.
5.2

Measures to ensure safe system operation

The operator must ensure in particular that ...
•
a locally available power disconnection unit is installed. The power disconnec-
tion unit must be easily accessible and in the direct vicinity of the warewashing
machine.
The following requirements must be fulfilled:
– Load-break switch as per IEC 60947-3
– Utilisation category AC23B
– Lockable in OFF position
– Protection class against water IPX5
– The load-break switch must be installed in the direct vicinity of the
machine and must be easily accessible at a height of 0.6 - 1.9m
– Short-circuit breaking capacity >= 10kA
– Load-break switch rated operating current
– >= Machine's total current (type label) + 10%
– Neutral conductor shutdown optional
•
the dishwashing machine is used in accordance with the regulations only.
in case of other use or operation, damage or risks may arise for which we ac-
cept no liability (cf. chapter "Intended use").
•
in order to preserve the operational and safety guarantees, whenever re-
quired, only original parts supplied by the manufacturer are used. Any poten-
tial claims by the user shall be rendered void if the system was altered using
parts other than original spare parts.
•
only appropriately qualified and authorized personnel use, maintain, and re-
pair the installation.
•
staff is regularly trained in all questions relating to occupational safety and en-
vironmental protection and, in particular, that staff is familiar with the operating
instructions as well as with the safety instructions they provide.
Design and construction subject to change without prior notice!
Page 12 of 42
NOTE