Table of Contents
Advertisement
3/
SOFTWARE CONFIGURATIONS AND CONVENTIONS
Before configuring MSP-Nodes, read the following list of mandatory tasks. Refer to this list to ensure the basic tasks
required for proper system operation have been performed. Note that some of these tasks may already have been done.
Mandatory tasks:
Booting from LAN, from virtual media or from onboard storage
Installing an OS
Conventions:
The following conventions are used in this guide:
Elements between
< >
between
( )
show a value range for the variable spelled out, e.g.,
number of the switch and that this number can be between 1 and 5.
The
|
symbol indicates a choice between two or more alternatives, e.g.
Elements in black bold are selectable menu items or button names.
Elements in
blue italics
The > symbol separates a series of operations required to access a specific element.
Refer to the MSH89xx
Refer to the SYMKLOUD MS29xx Platform Quick Start Guide for a list of default IP addresses.
Configuration command tables:
Sections 5/ contain 2-column tables. The first column describes steps that can be performed in the Web-type interface(s)
named in the header. The second column describes steps that can be performed in CLI-type interface(s) specified in the
header. See Figure 6 and
The Kontron ipmitool package can be downloaded from the Kontron MS2900 web page
under Tool:
http://www.kontron.com/products/solutions/cloud-computing-platform-
Ensure the protocol is enabled for the interface you want to access.
Figure 7 to find out how to access the specified Web-type or CLI-type interface.
in
blue
are variables. The value shown is an example or an instruction of what to enter. Items
are configuration options or types.
solutions/symkloud-ms2900-web.html
www.kontron.com
MSP8020 Series User Guide Rev. 1.1
<Switch No. (1-5)>
means that you must enter the
x|y|z
// 22
Advertisement
Table of Contents
