Table 5: Default Usernames And Passwords Of Management Interfaces; Figure 7: Diagram Of Interface Paths With A Serial Console Connection - Kontron MSP8020 Series User Manual

Figure 7: Diagram of interface paths with a serial console connection

The serial port communication parameters are 115200 baud, no parity, 8 data bits and backspace key set to "Ctrl-h". BIOS
POST and configuration menu redirection is VT100+. OS console support/configuration is customer specific.
Example of a serial connection to

Table 5: Default usernames and passwords of management interfaces

2 times in a row.
1.
2. Establish a connection using the PC terminal emulator with the parameters 115200
baud, no parity and one stop bit
3. To configure the hub console port MUX, type
<Node Server No. (1-2)>
Configuration interface
SystemMonitor WebUI
ShMC CLI
Server serial console (OS)
www.kontron.com
MSP8020 Series User Guide Rev. 1.1
- -
serial console (OS):
Ctrl-g <Node No.
Username
admin
admin
Customer specific Customer specific
-
(1-9)>, then Ctrl-gg
Password
admin
admin
// 19