Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Kontron MSP8020 Series
Summary of Contents for Kontron MSP8020 Series
- Page 1 USER GUIDE MSP8020 Series Doc. Rev. 1.1...
- Page 2 Disclaimer Kontron would like to point out that the information contained in this manual may be subject to alteration, particularly as a result of the constant upgrading of Kontron products. This document does not entail any guarantee on the part of Kontron with respect to technical processes described in the manual or any product characteristics set out in the manual.
- Page 3 If you have any difficulties using this user's guide, discover an error, or just want to provide some feedback, please send a message to Kontron. Detail any errors you find. We will correct the errors or problems as soon as possible and post the revised user's guide on our website.
-
Page 4: Symbols Used In This Manual
MSP8020 Series User Guide Rev. 1.1 SYMBOLS USED IN THIS MANUAL DANGER indicates a hazardous situation which, if not avoided, will result in death or serious injury. WARNING indicates a hazardous situation which, if not avoided, could result in death or serious injury. -
Page 5: Table Of Contents
MSP8020 Series User Guide Rev. 1.1 TABLE OF CONTENTS Symbols Used in this Manual ..................................4 Table of Contents ....................................... 5 List of Tables ........................................5 List of Figures ........................................6 List of Acronyms ......................................... 6 Electrostatic Discharge ....................................7 Limited Warranty ....................................... -
Page 6: List Of Figures
MSP8020 Series User Guide Rev. 1.1 LIST OF FIGURES Figure 1: SYMKLOUD layers ..................................... 8 Figure 2: MSP802x in rear of chassis ................................9 Figure 3: MSP802x block diagram ................................10 Figure 4: MSP802x LEDs and buttons ..............................13 Figure 5: Server Ethernet connections ..............................15 Figure 6: Diagram of interface paths with a management networking connection .............. -
Page 7: Electrostatic Discharge
The extent of Kontron liability to the customer shall not exceed the original purchase price of the item for which the claim exists. -
Page 8: 1/ Product Description
MSP8020 Series User Guide Rev. 1.1 PRODUCT DESCRIPTION 1.1. PRODUCT OVERVIEW The MSP8020-series MSP-Nodes are processor nodes for the SYMKLOUD MS2900-Series platform. Nine MSP-Nodes can be installed in each MS29xx and each MSP-Node has two CPU engines (servers). When used with two Hubs, each server supports two 1GbE ports. -
Page 9: Figure 2: Msp802X In Rear Of Chassis
MSP8020 Series User Guide Rev. 1.1 Figure 2: MSP802x in rear of chassis For information on other SYMKLOUD MS29xx user manual. To ensure you have the latest document version or to consult other SYMKLOUD documents, visit Kontron website at http://kontron.com/. -
Page 10: Block Diagram
MSP8020 Series User Guide Rev. 1.1 1.2. BLOCK DIAGRAM Figure 3: MSP802x block diagram For a block diagram of the entire MS29xx system, refer to the SYMKLOUD MS29xx Platform www.kontron.com // 10... -
Page 11: Pci Mapping
MSP8020 Series User Guide Rev. 1.1 1.3. PCI MAPPING Table 1: PCI Mapping Bus: Device. Device Component Description Note Function CPU* 00:00.0 0d04 Host bridge Intel Corporation (rev. 08) 00:01.0 0d01 PCI bridge Intel Corporation (rev. 08) 00:02.0 0d26 VGA compatible Intel Corporation (rev. -
Page 12: Msp-Node Key Components
1 PCIe x2 Gen 2 1 serial port accessible through: MS29xx Hub serial RJ45 (one connection shared by both servers), refer to The Kontron ipmitool package can be downloaded from the Kontron MS2900 web page under Tool: http://www.kontron.com/products/solutions/cloud-computing-platform- ... -
Page 13: Msp-Node Features
MSP8020 Series User Guide Rev. 1.1 1.5. MSP-NODE FEATURES Table 3: MSP-Node features Feature Description Remote management IPMI 2.0 KVM/virtual media Comprehensive sensor network and event monitoring Refer to the MSP802x Sensor List for a list of sensors. Validated OS Ubuntu Server, 64-bit, long-term support release 12.04... -
Page 14: Interfacing
MSP8020 Series User Guide Rev. 1.1 Table 4: LED status description and button behavior LED status State ID (blue) Power (green) Status (amber) Identify command in progress Blinking Not affected Not affected ON: not healthy Payload power ON for at least one server... -
Page 15: Figure 5: Server Ethernet Connections
MSP8020 Series User Guide Rev. 1.1 For Server1 (CPU1), the F1 (fabric 1) port connects to HUB1 and the B2 (base 2) port connects to HUB2; For Server2 (CPU2), the F2 port connects to HUB2, and the B1 port connects to HUB1. Refer to Figure 5 for a visual reference. -
Page 16: Mac Addresses Table
MSP8020 Series User Guide Rev. 1.1 1.7.1. MAC ADDRESSES TABLE: The following table explains how the 6 MAC addresses are assigned to each MSP802x: Table 4: MSP802x MAC addresses Interface/Port MAC value Server Bus:Dev.Fn Device: Driver Notes Base: B2 <Base_MAC>... - Page 17 USB drive or ISO image, to the servers as a remote device. Once mounted, the device appears as a local device. For configuration, refer to the MSP802x KVM Configuration guide on Kontron website under product MS2900 Manuals http://www.kontron.com/products/systems/cloud-systems/symkloud-ms2900-...
-
Page 18: Figure 6: Diagram Of Interface Paths With A Management Networking Connection
H <BMC IP address> -U admin P admin I lanplus sol activate 2 The OS specific prompt is displayed, e.g., Login. The Kontron ipmitool package can be downloaded from the Kontron MS2900 web page under Tool: http://www.kontron.com/products/solutions/cloud-computing-platform- solutions/symkloud-ms2900-web.html Ensure the protocol is enabled for the interface you want to access. -
Page 19: Table 5: Default Usernames And Passwords Of Management Interfaces
MSP8020 Series User Guide Rev. 1.1 Figure 7: Diagram of interface paths with a serial console connection The serial port communication parameters are 115200 baud, no parity, 8 data bits and backspace key set to "Ctrl-h". BIOS POST and configuration menu redirection is VT100+. OS console support/configuration is customer specific. -
Page 20: 2/ Extracting And Inserting An Msp-Node
MSP8020 Series User Guide Rev. 1.1 EXTRACTING AND INSERTING AN MSP-NODE 2.1. EXTRACTING AN MSP-NODE ESD Sensitive Device! Take all necessary ESD protection measures. Steps in blue apply only to hot swap procedures. Press the power button of the MSP-Node to be extracted. (The power button should be configured in the operating system so that it performs a clean shutdown when pressed.) -
Page 21: System Behavior Upon Hot Swap
MSP8020 Series User Guide Rev. 1.1 ESD Sensitive Device! Take all necessary ESD protection measures. Holding the handle, insert an MSP-Node. Push it in until the safety lock locks in place. The ID LED becomes steady blue and then turns off during BMC initialization. -
Page 22: 3/ Software Configurations And Conventions
The second column describes steps that can be performed in CLI-type interface(s) specified in the header. See Figure 6 and The Kontron ipmitool package can be downloaded from the Kontron MS2900 web page under Tool: http://www.kontron.com/products/solutions/cloud-computing-platform- ... -
Page 23: 4/ Configuring Msp-Nodes
MSP8020 Series User Guide Rev. 1.1 CONFIGURING MSP-NODES 4.1. MSP-NODE RESET To reset a server on an MSP-Node: From the server serial console Send a break sequence (ctrl-break) From the SMWI Navigate to the target server Under Power Commands, select Reset. -
Page 24: Boot Order
MSP8020 Series User Guide Rev. 1.1 4.2. BOOT ORDER To set the boot order of an MSP-Node server: Perform a reset of the server (section 4.1) Press F2 when prompted to enter the bios setup menu Select the Boot tab to display the current boot order... -
Page 25: 5/ Performing Updates
MSP8020 Series User Guide Rev. 1.1 PERFORMING UPDATES A ZIP file provided by Kontron contains firmware updates for MSP-Node firmware components. 5.1. ONECLICK UPDATE FOR AN MSP-NODE To update the firmware of the MSP- BMC, BIOS and FPGA: SMWI Computer command prompt Dashboard >... -
Page 26: 6/ Appendix A Sensor Lists
6Fh (Sensor 0x16 Ver Change FPGA FPGA Firmware Change Detection Change) Specific) 0x17 Ver Change BIOS BIOS Firmware Change Detection 70h (OEM Kontron 0x18 IPMI Info-1 Internal Diagnostic) C0h (OEM Firmware Internal Management Controller Info) firmware diagnostic 71h (OEM Kontron... -
Page 27: Table 7: Mmc Sensor List
0Ah (Cooling Device) Cooling problem Discrete) Table 7: MMC Sensor list Hex ID Sensor Name Sensor Type Code Reading Type Code Description 70h (OEM Kontron 0x00 Bx:IPMI Info-1 Internal Diagnostic) Internal Management Controller (OEM Firmware 71h (OEM Kontron firmware diagnostic... - Page 28 Sensor Type Code Reading Type Code Description 7Fh (OEM Health General health status 0x13 Bx:Health Status (Platform Alert) Status) (Aggregation of critical sensors) C6h (OEM POST Show current postcode value 0x14 Bx:POST Value Value) (Sensor Specific) (No event generated) www.kontron.com...
-
Page 29: Table 8: Detailed Information For Specific Sensors
Sensor Sensor Specific ading Event Trigger Name Type offset type code IPMI Event Code Assert Trigger Info-1 Event Overflow Trigger Kontron Kontron Bx:IPMI 02h to 0Eh Code Assert Line (Binary Encoded) Firmware Firmware Info-1 Unused, Reserved Info 1 Info IPMI... - Page 30 ( IPMI Watchdog2 sensors gives additional details ) Bx:CPU Standard 01h: IPMI commands [ cold, warm or forced cold ] Reset IPMI Kontron State Asserted / ( chassis control, FRU control ) Discrete Reset State Deasserted 02h: Processor internal check stop...
- Page 31 Kontron is a listed company. Its shares are traded in the Prime Standard segment of the For more information, please visit: http://www.kontron.com/ ...