Table of Contents
Advertisement
Figure 6: Diagram of interface paths with a management networking connection
SOL cannot be active at the same time as a serial port backplane connection on the MSH89xx hub. When a connection is
attempted via the serial port while an SOL session is open, SOL will be disconnected. When an SOL connection is attempted
while a serial port connection is active, the serial port connection will be disconnected.
Example of an SOL connection to
The Kontron ipmitool package can be downloaded from the Kontron MS2900 web page
under Tool:
http://www.kontron.com/products/solutions/cloud-computing-platform-
Ensure the protocol is enabled for the interface you want to access.
1.
Connect to the management port with a cable or via a network.
2.
Establish an SOL connection using ipmitool:
From a PC (for Server1):
ipmitool H
<BMC IP address>
From a PC (for Server2):
ipmitool H
<BMC IP address>
3.
The OS specific prompt is displayed, e.g., Login.
solutions/symkloud-ms2900-web.html
www.kontron.com
MSP8020 Series User Guide Rev. 1.1
serial console (OS):
-U admin P admin I lanplus sol activate [1]
-U admin P admin I lanplus sol activate 2
// 18
Advertisement
Table of Contents
