Table of Contents
Advertisement
1.7.1. MAC ADDRESSES TABLE:
The following table explains how the 6 MAC addresses are assigned to each MSP802x:
Table 4: MSP802x MAC addresses
Interface/Port
Base: B2
Fabric: F1[.1]
Fabric: F2.2
Fabric: F1.3
Fabric: F2.4
Base: B1
Fabric: F2[.1]
Fabric: F1.2
Fabric: F2.3
Fabric: F1.4
Board-BMC
Not used
No additional Fabric ports (F1.2, F1.3 and F1.4 as well as F2.2, F2.3 and F2.4) are supported when using MSP802x, regardless
of the MSH-HubNode used.
1.7.2. MANAGEMENT NETWORK CONNECTION
The SYMKLOUD platform comes with a System Monitor (SM). The SM includes a web user interface and a programmatic API
to access system components, including its ShMCs and MSP-Nodes.
The IOL IP address of the component you want to connect to might be required when using certain paths. The IP address of
external entities must be in the same subnet as that of the SYMKLOUD components as no default gateway is configured. The
default IOL IP addresses are shown in Figure 5.
Figure 5: Default IP addresses
MAC value
Server
<Base_MAC>
1
<Base_MAC>+1
1
N/A
N/A
N/A
N/A
N/A
N/A
<Base_MAC>+2
2
<Base_MAC>+3
2
N/A
N/A
N/A
N/A
N/A
N/A
<Base_MAC>+4
BMC
<Base_MAC>+5
N/A
www.kontron.com
MSP8020 Series User Guide Rev. 1.1
Bus:Dev.Fn
Device: Driver
01:00.0
I210: igb
00:19.0
I217: e1000
N/A
N/A
N/A
N/A
N/A
N/A
01:00.0
I210: igb
00:19.0
I217: e1000
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
Notes
Not used
// 16
Advertisement
Table of Contents
