Pulse Configuration Dn150-Dn250 - Kamstrup ULTRAFLOW 54 Technical Description

TECHNICAL DESCRIPTION

10.4.6 Pulse Configuration DN150-DN250

Programming of meter factor and pulse duration for ULTRAFLOW
DN250" is used to change meter factor and pulse duration to match calculator and other equipment. E.g. if
®
ULTRAFLOW is connected to a calculator which does not support Kamstrup's fast pulses. See Table 33 for valid
programming options.
Open "Pulse Configuration DN150-DN250"
"qp": Based on the program-
med standard flow curve.
"Meter factor": Only
factors are available.
"Pulse duration": Only
durations are available.
"Write": Programs ULTRAFLOW
DN150...250 according to
the selected values.
the valid meter
the valid pulse
®
54
5512-385 GB/02.2014/Rev. H1
ULTRAFLOW
®
54 DN150...250. "Pulse Configuration DN150-
®
54 and 34
69