TECHNICAL DESCRIPTION
9.10.5 Spare parts
Description
Battery D-cell
Cable retainer (secures the battery)
2-pole plug (female)
3-pole plug (female)
PCB (66-R)
9.10.6 Changing the battery
If the PULSE TESTER is used continuously we recommend that the battery is replaced once a year.
Connect the battery to the terminals marked "batt.", the red wire to + and the black one to -.
Current consumption:
Curent consumption with no sensors connected
Max. current consumption with two ULTRAFLOW
Note: If the base unit is fitted with battery or externally supplied, the PULSE TESTER's integral supply must be
disconnected (the plug must be removed).
Table 29. Spare parts for PULSE TESTER.
®
connected
5512-385 GB/02.2014/Rev. H1
ULTRAFLOW
Type No.
66-00-200-100
1650-099
1643-185
1643-187
5550-517
400 µA
1.5 mA
®
54 and 34
57