Cable Length - Kamstrup ULTRAFLOW 54 Technical Description

TECHNICAL DESCRIPTION
7.7.1

Cable length

Maximum allowable cable length between Pulse Transmitter/Pulse Divider and MULTICAL
module used in Pulse Transmitter/Pulse Divider as well as how the MULTICAL
Pulse Transmitter/Pulse
Divider output module
*) MULTICAL® 601/602 must have sensor connection type D and external 24 VDC supply.
Please note that using long signal cables requires careful consideration in connection with installation. There
must be a distance of min. 25 cm between signal cables and all other cables to prevent electrical disturbance.
30
Y=2
Y=3
Table 18. Maximum cable length between Pulse Transmitter/
Pulse Divider and MULTICAL
5512-385 GB/02.2014/Rev. H1
®
MULTICAL 601/602/801
2-wire connection 3-wire connection
< 100 m *)
N/A
®
.
®
ULTRAFLOW 54 and 34
®
depends on the output
®
calculator is connected.
< 25 m
< 25 m