Accessories For Pulse Transmitter And Pulse Divider; Cables - Kamstrup ULTRAFLOW 54 Technical Description

TECHNICAL DESCRIPTION

4.7 Accessories for Pulse Transmitter and Pulse Divider

Please note that not all article numbers in Table 10 can be directly ordered. Some must be ordered via Kamstrup
service department
Article number
65-000-000-2000
1)
3026-477
1)
1650-157
65-000-000-7000
65-000-000-8000
5000-290
5000-286
66-99-012
66-99-013
5000-333
5000-259
5000-270
3026-207
1)
Obligatory when changing from mains supply module to battery supply.
2)
Including 5000-290.
4.7.1

Cables

Pulse Transmitter and Pulse Divider are optionally available with signal cable in lengths of 2.5, 5 or 10 metres. The
signal cable is mounted from the factory.
If 24/230 VAC supply module is selected, Pulse Transmitter and Pusle Divider are optionally available with mains
supply cable. The cable is mounted from the factory.
Description
D-cell lithium battery with two-pole connector
Fitting for D-cell battery
Plug for cable connection
2)
230 VAC supply module
2)
24 VAC supply module
Cable between supply module and output module
24/230 VAC power cable
Output module (Y=2), galvanically separated
Output module (Y=3), galvanically separated,
"Low power"
2.5 m silicone cable (3-wire)
5 m silicone cable (3-wire)
10 m silicone cable (3-wire)
Bracket for wall munting
Table 10. Accessories for Pulse Transmitter and Pulse Divider.
5512-385 GB/02.2014/Rev. H1
®
ULTRAFLOW 54 and 34
Note
(when ordering Pulse
Transmitter/Pulse Divider)
Enclosed if battery supply
or "No supply" is selected
Enclosed if battery supply
or "No supply" is selected
Enclosed if supply module
is selected
Optional
Optional
Optional
Optional
Optional
15