Pulse Divider Type No. 66-99-607 - Kamstrup ULTRAFLOW 54 Technical Description

TECHNICAL DESCRIPTION

10.4.4 Pulse Divider type No. 66-99-607

Setup and programming of Pulse Divider type No. 66-99-607. A Pulse Divider is used for adapting flow signals to
calculators, e.g. if a "foreign" calculator is connected to Kamstrup ULTRAFLOW
CCC or pulse duration) does not correspond.
Open "Pulse Divider"
"Read":
"Write":
"Label type":
"Print":
"Close":
®
ULTRAFLOW
Meter
q
p
factor
[m³/h] [imp/l]
0.6 300
1.5 100
2.5 60
3 50
3.5 50
6 25
10 25
10 15
15 10
25 10
25 6
40 5
60 2.5
100 1.5
150 1
250 0.6
400 0.4
600 0.25
1000 0.25
Table 31. Pulse division table (pulse duration divided pulses std. 100 ms).
Reads the current coding of the Pulse Divider.
Programs the Pulse Divider with the entered data.
Makes it possible to select position on Kamstrup label sheet.
Prints Pulse Divider label on the standard printer selected in the PC.
Terminates Pulse Divider.
Meter Meter
Divider
factor factor
[l/imp] [l/imp]
1 300
1 100
1 60
1 50
2.5 125
10 250
10 250
10 150
10 100
10 100
10 60
25 125 100
100 250 250
100 150 250
100 100 250
100 60 250
250 100 1000
1000 250 2500
1000 250 2500
5512-385 GB/02.2014/Rev. H1
Pulse Divider
Meter
Divider
factor
[l/imp]
2.5 750
2.5 250 10
2.5 150 10
2.5 125 10
10 500 25
25 625
25 625
25 375
25 250 100
25 250 100
25 150 100
500 250
625
375
250 1000
150 1000
400 2500
625
625
®
ULTRAFLOW 54 and 34
®
and the coding (number of pulses
Meter
Divider Divider
factor
[l/imp]
1000
600
500
1250
1000 250 2500
1000 250 2500
600 250 1500
1250
1000 2500 2500
600 2500 1500
1000
67