Metertool; Introduction; System Requirements For Pc; Interface - Kamstrup ULTRAFLOW 54 Technical Description

TECHNICAL DESCRIPTION

10 METERTOOL

10.1 Introduction

METERTOOL is a collection of programs used for servicing Kamstrup heat meters.
"METERTOOL for ULTRAFLOW
software makes it possible to adjust ULTRAFLOW
"METERTOOL for ULTRAFLOW
programming/adjusting ULTRAFLOW

10.2 System requirements for PC

METERTOOL requires minimum Windows XP SP3, Windows Vista or Windows 7 (32-bits or 64-bits) or newer as well
as Microsoft Internet Explorer 5.01.
Minimum requirements:
Administrator rights to the PC are required in order to install and use the programs.
The programs must be installed under the login to be subsequently used for the programs.

10.2.1 Interface

The following interfaces can be used:
Interface for Type No.
®
ULTRAFLOW 54 66-99-141
®
ULTRAFLOW 14/24 66-99-002
®
ULTRAFLOW 34 66-99-006
Pulse Divider 66-99-140
NOTE: The supply to ULTRAFLOW
sensors are powered via the connected communication interface.
The USB Interface (66-99-141) includes a converter box which secures galvanic separation of the supply to the
flow sensor.
In order to mount the plug in the flow sensor, the sealing cover must be removed. If the sensor is used where
verification is required, an authorised laboratory must reverify and reseal the sensor before it is remounted. The
positions of laboratory labels and year marks appear from Figure 34 and Figure 35.
58
®
X4" is a Windows
®
®
X4" has been developed to provide laboratories a simple and efficient access to
®
X4. Furthermore, It is used for programming the Pulse Divider.
Pentium 4 or equivalent (Atom processor/netbooks/mini PCs are not supported)
2 GB RAM
10 GB HD
Display resolution 1024 x 768
USB as well as CD-ROM drive
Printer installed
Description
Cable with USB plug for PC and 4-pole plug for ULTRAFLOW
Pulse Divider 66-99-907.
Adapter for connecting ULTRAFLOW
Adapter for connecting ULTRAFLOW
Cable with serial plug for PC and 8-pole plug for Pulse Divider 66-99-607.
Table 30. Communication interfaces.
®
and/or Pulse Divider, if any, must be disconnected during programming. The
5512-385 GB/02.2014/Rev. H1
®
-based software. In combination with a PC and interface the
X4.
®
ULTRAFLOW
®
®
14/24. Plugged onto 66-99-141.
®
34. Plugged onto 66-99-141.
54 and 34
54 and