Mounting Accessories - BOCK belluno Assembly And Operation Manual

5.2

Mounting accessories

The following standard accessories can be combined with the bed models:
Side rail height increase:
Delivery includes:
Fully assembled side rail height increase
- Open the plastic lock, attach the side rail extension, position it in the middle
and close the lock. Please make sure that the release button of the side rail
height increase faces outwards.
Important note:
The Bock side rail height increase is designed for use with all Bock wood side rail vari-
ants. Hermann Bock GmbH does not accept any liability for the use of these products on
other makes!
Lifting pole with triangle handle, 6.5 kg
The safe working load of the lifting pole is max. 75 kg.
Delivery includes:
1 piece lifting pole with hook-up loop
1 piece triangle
- Place the lifting pole with triangle handle in the pro-
vided hook-up loop at the head part and adjust it ac-
cordingly.
- Make sure to only use mattress with a required mat-
tress height as described by the company Bock. You can
find this information in section 5.3.
ATTENTION: The lifting pole with a triangle handle must not swivel outside of the lying
surface.
When used in line with its intended purpose, the service life of the triangle handle is ap-
prox. 5 years. If a lifting pole with triangle handle installed to the bed, it must be tested
during each safety technical control, but must be replaced no later than after 5 years.
44