BOCK belluno Assembly And Operation Manual page 13

To lower the other side as well, grasp the side rail on the side of the end panel in the
gripping groove, release the release button on the end panel (Fig. 3) and slowly lower
the side rail downwards. The side rail is now in the lowered position (Fig. 4).
Fig. 3 Fig. 4
If the side rail element should be placed in the
top position to aid in fall prevention, reach
with both hands in the centre of the gripping
groove in the upper side guard rail, and pull it
upwards until you hear it click into place at
both ends. The side rail is now in the raised po-
sition (Fig. 5).
Fig. 5
13