BOCK belluno Assembly And Operation Manual page 11

The chassis
The height adjustment of the beds is carried out via a base frame with single or double
drive. The surface of the tubular steel structure is stove-enamelled with a PES-powder
coating.
The side rail
Each nursing care bed can be equipped on both sides with two side rails at a special safety
height. The side rails can be lifted and lowered through a rail. The sliding pieces run par-
ticularly smoothly and quietly with an impact damper, and each end is fitted with a func-
tional cap. The side rail can be easily operated through an ergonomically designed release
button. Depending on the model, shorter or longer divided side rail variations are availa-
ble.
The split side rails*
The nursing care bed is optionally available with split side rails. The divided side rails serve
to protect against falling out and at the same time enable safe and comfortable boarding
and alighting. By means of a simple release mechanism, each individual side rails element
can be brought into a raised or lowered position.
* Not available on all model series.
11