BOCK belluno Assembly And Operation Manual page 38

Finally push on the end pieces completely and screw them tightly. The side rails are now
ready for use.
After assembly or before putting the bed into operation, move the adjustment range of
the lying surface over the control unit to check the optimum positioning of the cables. The
adjustment range must be passable without obstacles.
The power cable must be routed outside the bed and the hand control must be exposed.
Bed extension (models belluno, combiflex, combiflex.fc and practico economic)
The delivery for a lying surface extension consists of
the following parts:
- 2 adapter unit for the left and right foot part
- 1 extension piece for the foot part
1 set side rails
- Fixing screws
38