The Behavior Of The System In Compatibility Mode For Grade 2 - EBS CPX200NB Installation And Programming Manual

- Keypad communication lost
- Keypad tamper
- Keypad power failure
- Time lost
10.2. THE BEHAVIOR OF THE SYSTEM IN COMPATIBILITY MODE FOR
GRADE 2
The system operates in accordance with the EN 50131 standard requirements for Grade 2,
i.e.:
 zones status is available only after user code has been entered
 information about alarms is available only after user code has been entered
 information about alarms memory is available only after user code has been entered
 information about failures is available only after user code has been entered
 information about failures memory is available only after user code has been entered
 arming requires authorization
 prior to arming, the control panel checks circumstances that may prevent arming
 the codes in the system must be at least 5 characters
 after entering an invalid code three times, all keypads in the system will be blocked
for 90 seconds.
CPX200NB ALARM CONTROL UNIT – INSTALLER MANUAL 93 / 116