Table of Contents
Advertisement
11.1.3.7. CPSETADMINPASSWORD
Format:
Limitations:
Description
CPX200NB ALARM CONTROL UNIT – INSTALLER MANUAL
CPSETADMINPASSWORD=newPassword
This command only works when sent through an encrypted way, you do
not need to know the administrator password (the user id == 0). The
command needs the option"Allow remote user management" to be set
active in the Configurator. Can be executed only by ATS or administrator.
Changes the main user password - the system administrator. The
command is designed to give the ability to remotely restore the password
(by monitoring station employees) if it is forgotten. NewPassword is the
new password of the main user. The command returns:
CPSETADMINPASSWORD:EOK
CPSETADMINPASSWORD:ENOT_ALLOWED
If the command is sent via open SMS or the configuration does not allow
remote management of users
CPSETADMINPASSWORD:ELENGTH
If the new password is too short or too long or does not consist of digits
CPSETADMINPASSWORD: EPERMISIONS
If the password can not be changed because it is already used by another
user. If you type the current administrator password, the command returns
EOK.
106 / 116
Advertisement
Table of Contents
