Emergency Buttons Configuration - EBS CPX200NB Installation And Programming Manual

parameters of the complex service function are entered. Press
cancel changes entered in currently configured parameter only and
exit service function – previously entered parameters, confirmed with
, will not be cancelled.

6.11. EMERGENCY BUTTONS CONFIGURATION

To configure emergency buttons, use the following pattern:
where:
XX
– emergency button:
 01 – fire
 02 – help
 03 – panic
 00 – all buttons above
Y
– enable/disable emergency button:
 0 – disable emergency button
 1 – enable emergency button:
o 1 – output 1
o 2 – output 2
o 3 – output 3
After service command confirmation, there will be digits displayed which represent outputs
activated by emergency button. Use digits 1-3 to change this setting.
Functions which configure all three buttons, will not change the outputs setting.
Example:
a) enabling all emergency buttons:
b) enabling "panic" (burglary) function (
output 3 state:
CPX200NB ALARM CONTROL UNIT – INSTALLER MANUAL
<XX> <Y>
held) and changing output 2 and
to
37 / 116