Control Unit Functions; Functional Characteristic - EBS CPX200NB Installation And Programming Manual

2. CONTROL UNIT FUNCTIONS

2.1. FUNCTIONAL CHARACTERISTIC

ZONES
 7 wired zones with the NC / NO / EOL-NC / EOL-NO / DEOL-NC / DEOL-NO configuration
possibility
 Detection lines – instant, delayed, 24h burglary, arming/disarming, 24h tamper, interior
delay, 24h burglary silent, 24h fire, perimeter, perimeter exit, arming/disarming by state
change
PROGRAMMABLE OUTPUTS
 1 monitored alarm output, high-current (max. current 1.1A)
 2 monitored alarm outputs, low-current (max. current 50mA)
FEEDING OUTPUTS
 1 signalling device output (max. current 350mA)
 1 detector output (max. current 350mA)
 1 keypad output (max. current 100mA)
PARTITIONS
 2 partitions with the possibility to assign any number of zones to each of them
KEYBOARD
 cooperation with LED keyboard KP16
 ability to connect up to three keypads
TRANSMISSION
 Transmission of signals through GPRS/SMS module
 Encryption of data transfer using AES standard
 Communication with monitoring station using dedicated OSM.Server server that ensures
the reliability of data transfer thanks to a redundancy function
 Control of GSM/GPRS connection – automatic restoration of connection with monitoring
station or switching to secondary server
CONFIGURATION
 Local, using KP16 keypad or a computer
 Remote through GPRS, SMS or CSD
USERS
 1 admin code (main)
 1 service code
 8 user codes
 Possibility to restrict the scope of authorization to a few codes only
SYSTEM OPTIONS
 Automatic diagnosis of basic system components
 Possibility to review faults, alarm memories, event log
 System/technical event history – min. 5000 events
CPX200NB ALARM CONTROL UNIT – INSTALLER MANUAL 7 / 116