Electrical Characteristic - EBS CPX200NB Installation And Programming Manual

2.2. ELECTRICAL CHARACTERISTIC

Supply voltage:
Required transformer Power:
Current consumption average/max:
(average measured@: fully charged battery,
established connection with server, connected keypad,
no sensors connected)
Average current consumption; lack of
external supply (without keypad/ with
keypad):
(fully charged battery, no sensors connected,
established connection with server)
Charging current:
(measured with totalny discharged battrey)
Charging voltage:
Supported bartery type:
Low voltage – event treshold:
Voltage battery cut off level:
Working temperature:
Working humidity:
PCB dimensions:
CPX200NB ALARM CONTROL UNIT – INSTALLER MANUAL
18VAC (16-20VAC)
must use transformer with power
from 20VA to 60VA
120mA / 1100mA @18VAC
60mA / 80mA
max. 350mA
13.8V
Lead-acid 12V
11V
below 9V
-10ºC to +55ºC
5% to 93%
152mm x 78mm x 30mm
8 / 116