Table of Contents
Advertisement
Events associated with emergency buttons will be transmitted to monitoring
station only if they are enabled in the MONITORING tab (see item 8.6.).
8.3.4.2. Outputs
User can choose which outputs should be turned on in case of the emergency button
activation (pressing and holding a button for 3 seconds).
Each of the outpus has the reminder of it's function chosen in the Outputs tab.
8.4. SYSTEM OPTIONS
8.4.1.
Show failures history with SYSTEM diode
Selecting this option indicates that a fault occurred in the system and be completed. This
condition will be indicated by flashing SYSTEM LED on the keyboard KP16 until cleared
the fault memory.
8.4.2.
Ignore ATS failure
Selecting this option turns off signaling a loss of communication with the server on KP16
keypad.
8.4.3.
Turn automatic override for failure off
Selecting this option enables the system fault signal when arming.
CPX200NB ALARM CONTROL UNIT – INSTALLER MANUAL
70 / 116
Advertisement
Table of Contents
