Table of Contents
Advertisement
Fastrack)
(8), Parity (none), Stop Bits (1).
Click [Add] button to confirm the setting. The connection is saved (and moved to the
table). From that moment the program will enable a remote connection with the
equipment and allows reading and saving the parameters in the equipment's
memory.
Programming through CSD connection is possible also when OSM.Server system is
installed, with at least one GSM modem connected. If the device is registered for the
server (serial number and SIM card number – see OSM.Server Manual) you can use
the connection via OSM. Provided that no GPRS connection is established.
Programming attempt (via GPRS connection – see the above) will end with a question
whether you want to use a modem connected to the server. If the answer is yes, the
procedure will continue as in case of other programming channels.
7.3.1.6. File -> Archiving
All configuration wizard's settings, both these read from devices and these saved in
the equipment are automatically recorded on a hard drive. If, during configuration
wizard's installation no directories were changed, the files can be found in e.g.:
C:\Program Files\EBS\KonfiguratorLX\configs\CPX200NB_20000\
CPX200NB ALARM CONTROL UNIT – INSTALLER MANUAL
Connection name, e.g. Remote CSD
Serial port to which the GSM modem is connected to (e.g. Wavecom
PIN code of SIM card installed in the GSM modem, e.g. 1111
Serial port parameters: Number of bits per second (e.g. 115200), Data Bits
NOTE: Remote configuration via CSD channel is available only in
case the CSD data transfer is active for both SIM card inserted in
the equipment and SIM card installed in GSM modem.
Additionally, the control unit must accept CSD connections – see
item 5.5.2. Authorized numbers of GSM modems.
51 / 116
Advertisement
Table of Contents
