Dosing Function; Outputs - Siemens SITRANS FM100 Operating Instructions Manual

Parameter table Measuring
Sublevel Para- Subpara-
meter meter level
level 1
Unit List selection
Flow
sepa-
value input
ration
Simula-
tion See table Simulation mode
mode
Counter absolute/
Type bidirectional
Volume
Unit List selection
Unit List selection
Tem-
perature
Simula-
tions- See table Simulation mode
modus
Counter absolute/
Type bidirectional
Unit List selection
Part
volume
memory
Yes/No
reset
Simula-
tion See table Simulation mode
mode

10.5 Dosing function

see section 12

10.6 Outputs

The FM100 flowmeter provides a total of 2 outputs that are freely configurable. The
configuration of the outputs (output 1 and output 2) is done via a wizard function.
The wizard function guides the user step by step through all necessary settings.
Steps:
• Select output
• Selection of the source or the measurement variable to be output (Flow,
Volume, Temperature, Part volume)
• Selection of an output type (4-20 mA, 0-20 mA, 0-10 V, 2-10 V, alarm, pulse,
frequency output,IO-Link, control input)
• Setting the output (scaling, thresholds)
• Save the configuration
A5E48762204-AB
Sub- Sub- Description
para- para-
meter meter
level 2 level 3
Sets the flow unit
Sets the value for the
low flow cutoff
Sets the counting
mode
Sets the volume unit
Sets the temperature
unit
Sets the counting
mode
Sets the volume unit
Sets the counter
value to "0"
SITRANS FM100
Value range/
value list
L/m, L/h, m3/h,
galUS/m,
galUS/h,
galUK/m,
galUK/h, L/s,
mL/s, User
0 ≤ Value ≤
Range start
ml, L, m3,
galUS, galUK,
User
°C, °F, User
ml, L, m3,
galUS, galUK,
User
Default Default
value value
LPM GPM
galUs/
L/m
m
Range start
absolute
L L
°C °C
absolute
L galUs
page 23