Turnaround Assembly; Adjustment For Squareness - Kodak M35 Service Manual

Turnaround Assembly

Adjustment for Squareness

The illustration shows a DEVELOPER
RACK ASSEMBLY; however, the
procedure is the same for
disassembling all the RACK
ASSEMBLIES.
[1] Place the RACK ASSEMBLY on a smooth,
flat surface.
Turnaround
Assembly
981777
NOTE
SIDE PLATE (2)
Rack and Turnaround Assemblies
[2] Loosen the 4 HOLDING SCREWS.
[3] Rotate the 4 ADJUSTING SCREWS the same
amounts to move the TURNAROUND
ASSEMBLY up or down.
[4] Check that the 2 SIDE PLATES of the
TURNAROUND ASSEMBLY touch the flat
surface evenly.
[5] Tighten the 4 HOLDING SCREWS.
Upper Rack Assembly
HOLDING
SCREW (4)
ADJUSTING
SCREW (4)
H112_0096DCA
H112_0096DA
2-9